...
The measurement principle is infrared passive and does not cause any radiation (no radar measurements!)
The connection to our server runs over WiFi and is extremely “low power” and energy-saving. The autonomy is therefore over 3 years with a small battery
An average of 10 connections with the server are made per day, each connection takes about 3-5 seconds. This corresponds to an extremely low duty cycle of only 0.05%. For the remaining time (i.e. 99.95%) the WiFi module of the sensor is completely switched off
A WiFi connection is only established when the state of the desk changes, i.e. from “free” to “occupied” or the opposite. If a worker remains seated at the desk, no regular connections are created
The radiation power of the WiFi module in operation is about 20 times lower than that of a smartphone
How to get the SN / MAC of a device
In this page, we’ll explain to you the different methods how to get the serial numbers or mac addresses of your ROOMZ devices.
How to get the serial number or mac address for one device in the ROOMZ portal
...
Export the serial numbers and mac addresses to an .csv sheet in the ROOMZ portal
...
Now you can edit the Serial number and the MAC addresses as you wish.