All our Sensors are supplied with 3m dual sided stickers and screws. They can easily be installed on any flat surface.
When using the 3m stickers, clean the surface on which the Sensor must be installed and wait for it to dry.
Attach the rear part of the device first with 3m or screws and make sure the installation is properly secured.
Finally, clip the front part of the sensor to its base
There are 2 ways of installing the ROOM Sensor:
To a wall
Attached to the ceiling of the room
The approximate angle of detection of the ROOMZ Sensor is 110°, with a distance covered of about 5 meters.
Those 2 diagrams represent how a ROOMZ Sensor will behave, when installed in both positions.
Wall installation
Ceiling installation
We recommend a Detection check before definitely installing the device. |