What the colors at the beginning does it mean?
Keep your sensor with lens detector down (ROOMZ logo at the top right) and turn “on” the sensor.
First, both LEDs should blink green → The sensor is starting
In a second time the left LED shows the battery status → Green (good) , orange (2-3 months autonomy maximum) or red (needs to be changed)
Then the red LED shows the connection status → Green (good) , orange (connection to the server failed) or red (connection to the AP failed)
For the next 3 minutes, the LEDs will show if the sensor detects presence or not (you can do the test below).
How to check if me sensor detect presence ?
If a Sensor (Desk, Huddle or Room) always shows as busy, you can do the “box-test”. With this test, you will see if the sensor or the environment of the sensor is the problem.
...