/
3 - Device Registration

3 - Device Registration

Owned by Patrick Terreaux (Unlicensed)
Last updated: Jul 29, 2024 by Amar Zerig
1 min read

Go to Setup - Devices and click Add new device

  • ROOMZ Display : the Registration Code is on the bottom left of the screen, on a new device

  • ROOMZ Sensor :  the Registration Code is on the back of the sensor, at the bottom of the SILVER label (1 on the picture below).

    • Once registered on your RoomzPortal, the friendly name will be the 6 characters on the side of the sensor (2). This friendly name is also on the board (3) inside the sensor. If you open the sensor, make sure to use the right cover in order to do the correct mapping on your Portal.

       

Please register all your devices at once

 

Once a device is registered, you can give it a Friendly Name, to find it more easily in the system


Next step : 4 - Connection to the Wi-Fi

Related content