DESK Sensor

Owned by Patrick Terreaux (Unlicensed)
Last updated: Oct 28, 2021
1 min read

All our Sensors are supplied with 3m dual sided stickers and screws. They can easily be installed on any flat surface. 

  • When using the 3m stickers, clean the surface on which the Sensor must be installed and wait for it to dry. 

  • Attach the rear part of the device first with 3m or screws and make sure the installation is properly secured. 

  • Finally, clip the front part of the sensor to its base



The provided cardboard can be used to install the DESK Sensor in the right position, under the desk: 

We recommend a Detection check before definitely installing the device.