ROOM Sensor

All our Sensors are supplied with 3m dual sided stickers and screws. They can easily be installed on any flat surface. 

  • When using the 3m stickers, clean the surface on which the Sensor must be installed and wait for it to dry. 

  • Attach the rear part of the device first with 3m or screws and make sure the installation is properly secured. 

  • Finally, clip the front part of the sensor to its base



There are 2 ways of installing the ROOM Sensor: 

  • To a wall

  • Attached to the ceiling of the room

The approximate angle of detection of the ROOMZ Sensor is 110°, with a distance covered of about 5 meters. 

Those 2 diagrams represent how a ROOMZ Sensor will behave, when installed in both positions.



Wall installation 

 

Ceiling installation 

 

We recommend a Detection check before definitely installing the device.Â