ROOM Sensor

Open

All our Sensors are supplied with 3m dual sided stickers and screws. They can easily be installed on any flat surface. 

• When using the 3m stickers, clean the surface on which the Sensor must be installed and wait for it to dry. 

• Attach the rear part of the device first with 3m or screws and make sure the installation is properly secured. 

• Finally, clip the front part of the sensor to its base

There are 2 ways of installing the ROOM Sensor: 

• To a wall

• Attached to the ceiling of the room

The approximate angle of detection of the ROOMZ Sensor is 110°, with a distance covered of about 5 meters. 

Those 2 diagrams represent how a ROOMZ Sensor will behave, when installed in both positions.

Wall installation 

Open

Ceiling installation